Model FLM

Neoprene/Fiberglass Lift Slab Concrete Floating Floor System

Benefits

• STC 69/IIC 61 with 4" floating slab and 2" airspace over 6" concrete deck
• Various load capacities offered in either fiberglass or rubber isolators
• Easy to adapt for wide range of airspaces
• Standard mounts available for 3" and 4" thick concrete slabs
• Adapters available for thicker concrete slabs
• Engineering assistance and submittal drawings offered
• Factory installation and supervision available

Application

Kinetics Floor Lift Mount (Model FLM) consists of a resilient decoupler, cast housing, and leveling bolt. The housing incorporates two opposing side lugs for carrying concrete rebar. The leveling bolt is screwed into a threaded opening in order to lift or “jack-up” the concrete slab into final position i.e., floating the floor. Together with Perimeter Isolation Board (Model PIB), poly sheeting, and perimeter sealant, Model FLM becomes a complete floor isolation system.

Model FLM permits flexible design of a floating floor. For instance, create any airspace between the isolated slab and the structural deck by changing the length of the leveling bolt. Further, the top of the casting may be extended with an adapter to allow for any thickness of floating concrete slab. High load areas are handled either by adding extra mounts or by using higher capacity isolators. Generally, Model FLM mounts are laid out in accordance with submittal drawings provided by Kinetics Engineering. Model FLM offers the designer a simple, adaptable tool for assuring high-quality noise control from the floating concrete floor.

Product Literature

Product Information

Technical Information

Sound Test Data

Typical Submittal Drawing

Dimensions

Raised Detail

Isolating Floors Theory

Installation

Guidelines